We Carry the Right Pump for Every Application

                  Call Us - Take the Guess Work Out of What Pump To Buy !

Few things can be as confusing to a pond builder as choosing a pump. There are many different sizes and styles of pumps. We will try to help you understand the differences between pumps and how to select the best one for you. Many dealers and home improvement stores choose pumps based solely on price. They want to sell you a pump as cheap as possible – the problem is that while “cheap” pumps may work fine to pump out your boat or basement now and then, they will not last when used in a continuous duty operation like water gardening. Always choose a pump that is rated for continuous duty operation. While these pumps may cost a little more to purchase initially, they will last much longer and actually save you money in the long run.

HIGH VS. LOW EFFICIENCY PUMPS

We sells both high efficiency and low efficiency pumps. Both are rated for continuous duty operation but they are very different from each other. A high efficiency pump uses superior parts and will last longer and use less electric than a low efficiency pump. The electrical savings will pay the difference in price in a few short months!

HOW TO CHOOSE THE CORRECT SIZE PUMP
Next to each of our pumps in this catalog will be a chart showing how many GPM (gallons per minute) that pump will provide at 5' of head, 10' of head, etc.. To understand this you need to remember that water is heavy (8 lbs./gal.) and the higher a pump has to push the water the less volume it will provide. Important — the feet of head is the distance from the surface of the water level in the pond to the top of the waterfall. To create a nice “average” looking waterfall or stream, it takes 30 GPM for every 1' of width. To determine GPM needed multiply width of desired stream in feet x 30.
Example: We are building a waterfall that is 3' wide and 10' high above our pond. Multiply 3(width) x 30 = 90 GPM @ 10' of head. 

DON’T RESTRICT YOUR PUMP!
Often times pond owners use too small of a hose on their pump. Always use the same size hose, or even one size larger, as the discharge port on the pump.  Always match your pipe size to the amount of water being pumped regardless of the outlet size of the pump. Each fitting in your plumbing system creates resistance and can slow your flow. We recommend using our flexible PVC pipe which eliminates most fittings. The depth of the water where the pump is located does not count towards feet of head. Feet of head is the distance the water is lifted above the pond.

We carry a variety of both submersible and centrifugal water pumps, so we are certain you will find the right pump for your situation.!

SUBMERSIBLE WATER PUMPS

EasyPro Mag Drive Pumps:

EasyPro has spent considerable time with a major pump manufacturer to develop what they feel is one of the best values available in a mag drive pump! Compare the features, the warranty, the performance and the cost of these pumps to any other pump line and we think you'll agree they are the best value available!
• Mag Drive Motors — Super quiet and very energy efficient
• Epoxy Filled Motors - No oil
• Use under water or 200 - 2200 gph models can be used out of water as inline pumps
• Prefilter included on all pumps 200 gph and larger
• Flow diverter valve included with each fountain set
• Three Year Warranty* — Read the fine print, some leading pump companies offer a three year warranty but only on certain parts (the motor only has one year!). We offer a full three year warranty! (EP65 has only year warranty)
• Free fountain set with all 200 - 1350 gph pumps
• UL and cUL listed for safety
• Threaded discharge ports on all pumps for easy fitting connection

EasyPro Energy Efficient, Long Lasting Stainless Steel Pumps: Great pumps for water falls and streams!
• Rugged motor - designed for long life, continuous duty operation; motor housing is corrosion-resistant stainless steel
• Low maintenance - pump casing is made from abrasion resistant, fiber reinforced plastic for maximum life
• Vortex design prevents clogging
• Built-in overload and overheat motor protection
• 2" female threaded outlet
• 20' power cord
• Now available in four sizes: 2900, 3900, 4900 and 5900 GPH

Cal Pumps - Torpedo Pumps: The torpedo pumps are lightweight and water cooled! This eliminates any concerns of aquatic damage due to oil leaks.
• 20' power cords                                          • Use in or out of water!
• Noncorrosive construction for long life           • Convenient carrying handle
• Water cooled, capacitor start motor for         • Unique, space saving design
low energy consumption allows pump to lay horizontal.
Measures only 6" tall!

Supreme Pondmaster Pumps by Danner:High Quality Mag-Drive Pumps for Use in Fountains, Spitters and/or Ponds!
Limited 3 Year Warranty!
250-700 GPH MAG DRIVE PUMPS
These small pumps are built for use in or out of the water! Ideal for fountains, spitters and pond use.
• 10' power cord                                            • Foam prefilter included
• Ceramic shaft                                             
Prefilter included with each pump!
950-1500 GPH MAG DRIVE PUMPS
• Epoxy filled motors (no oil)                         • Use in-line or submerged!
• Tough ABS plastic pump housing               • Heavy duty copper windings
• UL listed
• Corrosion proof fasteners
• 18' power cords

Hozelock Cyprio Titan Series Pumps: Titan Series pumps are designed for use with filtration systems! Their solid handling design allows pumping of debris-laden water without plugging. Titan pumps are designed with a unique shape to maximize debris removal from the pond bottom while promoting maintenance-free use!
• High efficiency motors — designed for minimal electric usage while providing maximum flow
• Multi-sized outlet — side discharge with multi-sized outlet allows for use with 3/4" to 11/2" hose
• No foam strainer — eliminates need for frequent cleaning!
• Tool free access — case and motor can be easily accessed
• Thermal reset fuse (TRF) — protects pump from excessive wear if blockage occurs, simply unplug pump momentarily to reset
• Three year warranty! Titan pumps were engineered for efficiency, ease of use and durability!

Leader Submersible Waterfall Pumps: Leader submersible pumps are ideal for waterfalls, filters and recirculating systems. Their low cost and proven reliable performance makes them an excellent choice for continuous duty applications. Bottom intake allows water to be pumped down to 1/4" if desired.                                                                                  

• Completely noncorrosive (salt water compatible)            • 115 volt continuous duty motors
• 11/4" female threaded discharge, 11/4" elbow included   • 16' power cords
• The ES8 pump is included in our ET66, ET610, ET811, ES66, ES611 and ES811 pond kits!
• Use with Pump Pro-Tectors on page 19 to prevent plugging

Little Giant Pumps: This is one of Little Giant’s best general duty pumps. Features include an aluminum motor housing coated with epoxy, bottom inlet with removable screen for easy cleaning, mineral oil filled motors for maximum life and a built in carrying handle for portability. 1/6 HP motor has 15' power cord. Bottom inlet allows for water removal down to 1/8". Built for continuous duty operation. Applications include: dewatering, water supply to filters and waterfalls.

F & Q Stainless Steel Submersible Pumps: These stainless steel pumps are popular for use in fountains, waterfalls, and decorative fish ponds. Pump casings are made from 304 stainless steel for maximum protection against corrosion. Pump features:
• Open impeller
• Thermal overload protection with automatic reset
• 16' power cord
• Continuous operation when fully submerged
• 1/4 HP pump has top discharge, 1/2 HP and 1 HP have side discharge
• Bottom suction screen
• Lightweight, portable and easy to use
• 115 volt motors

 F & Q High Volume Submersible Pumps: These heavy duty, high volume cast iron pumps are perfect for large scale waterfalls! All pumps have sealed bearings with a minimum 10,000 hour operating life.
• All pumps available in 115v or 230v
• 3" NPT discharge
• One year warranty
• 33' Power cords
While these pumps are not as long lasting as the Berkeley Pumps, their high flow and low cost make them a popular choice for large waterfalls. These are the largest 115v pumps we offer!

Berkley 1/2HP Submersible Pumps:  High volume, reliability, energy efficiency – its easy to see why this pump is a favorite of ours!
• World famous Berkeley quality at an affordable price!
• 2" discharge – use with 3" pipe and check valve for maximum flow!
• 20' power cord
• Automatic thermal protection with auto reset

Berkley High Volume Industrial Pumps: These industrial quality pumps will not only provide high volumes of water, they are designed for years of reliable performance. Heavy duty cast iron construction will withstand operation in the toughest environments.
• 20' power cord                                           • Dual shaft seals for extra motor protection
• 3" discharge                                              • Built in thermal protection with automatic reset
• 230 volt motors                                          • Designed for use with debris laden water

Centrifugal Pumps (out-of-Water):

Superfalls Low-Head, High-Efficiency Pumps: Superfalls pumps can save enough energy in one year to pay for themselves! Superfalls pumps are the most energy efficient and reasonable priced pond pumps available.
• Pumps feature 360° discharge capability for easy plumbing connections
• All pumps feature a continuous duty motor, 115v with a 6' cord and plug
• Each pump includes two 2" unions for easy pump removal and service
• Rugged construction materials and high-efficiency, continuous-duty motors for years of reliable service
• Motors need protection from weather
• Pumps should be located a maximum of 11/2' above water level
• Pumps are not self priming - use check valves in suction line

Pondmaster X-Series External Pumps: The X-Series of pumps are designed for moderate to high volume pumping in ponds and waterfalls. Despite their greater pumping capacity, the heavy duty pumps are extremely energy efficient, using less power than other comparable models.
• 115 volt, energy efficient motors with 6' power cords
• Inlet/outlet is 2", unions are included for easy pump removal
• Motors are weatherproof! No additional protection is needed when used outdoors
• Not self priming, a check valve is included to be used in the suction line to make pump self priming

Sea Horse Continuous Duty, Self-Priming Pumps: These top-of-the-line pumps are ideal for a wide variety of applications including recirculating systems, filtration systems and waterfalls. One-half through 1 HP models maintain good flow at higher head pressures (see chart below).
• 115 volt motors have 6' power cords
• 11/2" inlet and outlet on all pumps
• See-through strainer lid has 1/4 turn twist lock for fast, easy inspection and cleaning
• One year warranty
• Fiberglass reinforced pump and strainer body

PerformancePro Cascade Pumps:  Industrial grade pumps designed for continuous duty operation! Every PerformancePro pump is factory tested prior to shipping to ensure flawless performance every time! 
Low RPM Motors — 1725 RPM motors run quieter, use less energy and last longer than other high RPM motors.
Super Quiet — Totally enclosed, fan cooled motors offer great protection from the weather and are super quiet.
Stainless Steel — Shaft seals for maximum durability and longevity.
Dual Voltage Motors — Come prewired for 115v, but can be easily field changed to 230v.
Not Self Priming — Use check valve on suction side of pump or with flooded suction.

PerformancePro Artesian Pumps: High Performance Self Priming Pumps, Low RPM Motors deliver high volumes of water at low energy consumption!
Self Priming — Design makes these pumps the ideal choice when the pump is located above the water level .
Super Quiet — Totally enclosed fan cooled motors are weatherproof
Dual Voltage Motors — Come pre-wired in 115v but can be easily field changed to 230v
Every pump is fully bench tested prior to shipping to ensure flawless operation right out of the box.

Sunami High Performance Waterfall Pumps: These new pumps are ideal for larger waterfalls due to their high flows and 3" inlet/ outlets.

 Compare all the features:
Huge Strainer Basket — Reduces back pressure and cleaning frequency
Tool Free — Access to strainer for easy cleaning
Totally Enclosed, Fan Cooled Motors — Weatherproof, low RPM and super quiet
3" Female Threaded Inlet/Outlet — 3" PVC male adapters are included
8' Power Cord — Included with each pump
Motors — Available in 115v only

Goulds Irri-Gator Pump: The Irri-gator series of pumps are perfect for many aquatic applications including dewatering, continuous water transfer, filtration, recirculating systems and waterfalls. Features include fast, self priming action, compact lightweight design, high pressure capabilities,and heavy duty construction including cast iron casing and abrasion resistant urethane impellers. Suction and discharge are 11/2" on all pumps. 115/230 Volt motors available on all pumps except 2 HP and 3 HP (230 volt only). Motors are open drip proof style for use outdoors. 6' power cord. One year warranty.

Pentair Aquatics Sea Flow High Performance Pumps:

• 2" inlet and outlet on all pumps
• All stainless steel hardware
• High-efficiency, long life impeller
• Over sized strainer basket
• Strainer has see through lid with quarter turn twist lock
• One piece, corrosion resistant strainer and pump chamber
• Unique Funnel FloTM diffuser for quiet operation
• Self priming
• Three year warranty