Just the Right Thing for that Perfect Spot

Just - A - Falls

Build a waterfall without a pond — Ideal for businesses and homeowners who want the sights and sounds of a waterfall but do not want the liability or maintenance associated with a pond! 

The waterfall/stream portion of a “Just-A-Falls” system is built the same as a normal
water feature, however, the retention basin at the bottom is much easier and faster to build
than a normal pond. Since you simply need a reservoir to hold water in, you do not need any
decorative shape or ledges built in. Simply dig the hole, install liner, place vault in hole
and fill with rock. 

The EasyPro Pond Vaults are built super heavy duty to withstand the pressure of being buried under rock. The vaults have slots cut in the sides which allows water into the pump.  36" intake pipe can be added to the vaults for increased flow rates.

Just-A-Falls are sold in a kit or individually. 

Kits include everything you need to build a beautiful waterfall:  

1. 45 Mil rubber liner                 2.  Felt underlayment

3.  EasyPro pond vault              4.  Submersible pump

5.  check valve assembly           6.  Spillway

7.  Flexible PVC pipe                8. WIK installation kit

When you buy a complete kit you receive a 10% discount!! 

These kits are easy to install simply dig a hole, lay down underlayment, liner, then place vault in the deepest part of the hole.  Then back fill with big rocks 3/4 of the way up the vault, place pump with check vale Assembly in vault, Hook up PVC pipe to pump and run it up to the bottom of the spillway.  Fill up the hole the rest of the way with gravel (small rock).  Landscape the area and add water.  When turned on, the water will be sucked in to the pump pushed through the pipe into the bottom of the spillway tub and out the top.  The length and width of your waterfall vary per kit.  We carry four sizes of kits smallest being 7' long stream and 18" wide waterfall to 30' long stream and 82" wide waterfall.