EasyPro 16" Straight Extension Module for Waterfall Spillway

WATERFALL SPILLWAYS (Patented) The only expandable waterfall spillway on the market!

Much easier to install than an AquaFalls and since it's expandable you can build as wide of a waterfall as desired!

The EasyPro Waterfall Spillway consists of a left and right end piece which when bolted to each other form an 18" spillway.

A 16" extension is also available which bolts in between the left and right end pieces. you can install as many of the 16" extensions as desired before attaching the ends.

Straight Waterfall spillways of 18", 34" and 50" will come assembled, spillways over 50" wide will come unassembled due to shipping concerns.

A bulkhead fitting is included for each end so water can enter from the left or right side!

A plug is included to plug whichever end is not used.

Waterfall spillways have a plastic grating just below the water level which not only keeps the walls from bowing when buried in the ground but also allows you to stack 3"-4" of rock to hide the spillway.

Waterfall spillways are designed to sit inside the liner eliminating any concerns of leaking. The liner simply goes under the spillway and up the back side. The bulkhead fitting secures liner to tub where the hose enters the spillway.

Waterfall Spillways are ideal for building waterfalls that do not need filtration.

They are a perfect choice when adding a waterfall to a natural pond, stream, lake, or other similar applications where filtration is not needed but a waterfall is desired.

Ends for this section are needed Part Number EWLR2 or EWLR3.

**price above only includes one straight 16" extension

* Actual Weight is 12#

* Ships oversize One